If you run into any problems while setting up Conduit, write an email to `timo@koesters.xyz`, ask us in `#conduit:matrix.org` or [open an issue on GitLab](https://gitlab.com/famedly/conduit/-/issues/new).
If you run into any problems while setting up Conduit, write an email to `timo@koesters.xyz`, ask us
in `#conduit:matrix.org` or [open an issue on GitLab](https://gitlab.com/famedly/conduit/-/issues/new).
## Installing Conduit
## Installing Conduit
You may simply download the binary that fits your machine. Run `uname -m` to see what you need. Now copy the right url:
Although you might be able to compile Conduit for Windows, we do recommend running it on a linux server. We therefore
only offer Linux binaries.
| CPU Architecture | GNU (Ubuntu, Debian, ArchLinux, ...) | MUSL (Alpine, ... ) |
You may simply download the binary that fits your machine. Run `uname -m` to see what you need. Now copy the right url:
Now we'll set up a systemd service for Conduit, so it's easy to start/stop
Now we'll set up a systemd service for Conduit, so it's easy to start/stop Conduit and set it to autostart when your
Conduit and set it to autostart when your server reboots. Simply paste the
server reboots. Simply paste the default systemd service you can find below into
default systemd service you can find below into
`/etc/systemd/system/conduit.service`.
`/etc/systemd/system/conduit.service`.
```systemd
```systemd
@ -77,10 +81,10 @@ Finally, run
$ sudo systemctl daemon-reload
$ sudo systemctl daemon-reload
```
```
## Creating the Conduit configuration file
## Creating the Conduit configuration file
Now we need to create the Conduit's config file in `/etc/matrix-conduit/conduit.toml`. Paste this in **and take a moment to read it. You need to change at least the server name.**
Now we need to create the Conduit's config file in `/etc/matrix-conduit/conduit.toml`. Paste this in **and take a moment
to read it. You need to change at least the server name.**
```toml
```toml
[global]
[global]
@ -128,8 +132,8 @@ address = "127.0.0.1" # This makes sure Conduit can only be reached using the re
## Setting the correct file permissions
## Setting the correct file permissions
As we are using a Conduit specific user we need to allow it to read the config.
As we are using a Conduit specific user we need to allow it to read the config. To do that you can run this command on
> **Note:** To run and use Conduit you should probably use it with a Domain or Subdomain behind a reverse proxy (like Nginx, Traefik, Apache, ...) with a Lets Encrypt certificate.
> **Note:** To run and use Conduit you should probably use it with a Domain or Subdomain behind a reverse proxy (like Nginx, Traefik, Apache, ...) with a Lets Encrypt certificate.
## Docker
## Docker
### Build & Dockerfile
### Build & Dockerfile
The Dockerfile provided by Conduit has two stages, each of which creates an image.
The Dockerfile provided by Conduit has two stages, each of which creates an image.
1. **Builder:** Builds the binary from local context or by cloning a git revision from the official repository.
2. **Runtime:** Copies the built binary from **Builder** and sets up the runtime environment, like creating a volume to persist the database and applying the correct permissions.
The Dockerfile includes a few build arguments that should be supplied when building it.
1. **Builder:** Builds the binary from local context or by cloning a git revision from the official repository.
2. **Runner:** Copies the built binary from **Builder** and sets up the runtime environment, like creating a volume to persist the database and applying the correct permissions.
``` Dockerfile
ARG LOCAL=false
ARG CREATED
ARG VERSION
ARG GIT_REF=origin/master
```
- **CREATED:** Date and time as string (date-time as defined by RFC 3339). Will be used to create the Open Container Initiative compliant label `org.opencontainers.image.created`. Supply by it like this `$(date -u +'%Y-%m-%dT%H:%M:%SZ')`
- **VERSION:** The SemVer version of Conduit, which is in the image. Will be used to create the Open Container Initiative compliant label `org.opencontainers.image.version`. If you have a `Cargo.toml` in your build context, you can get it with `$(grep -m1 -o '[0-9].[0-9].[0-9]' Cargo.toml)`
- **LOCAL:***(Optional)* A boolean value, specifies if the local build context should be used, or if the official repository will be cloned. If not supplied with the build command, it will default to `false`.
- **GIT_REF:***(Optional)* A git ref, like `HEAD` or a commit ID. The supplied ref will be used to create the Open Container Initiative compliant label `org.opencontainers.image.revision` and will be the ref that is cloned from the repository when not building from the local context. If not supplied with the build command, it will default to `origin/master`.
To build the image you can use the following command
To build the image you can use the following command
The `-d` flag lets the container run in detached mode. You now need to supply a `conduit.toml` config file, an example can be found [here](../conduit-example.toml).
The `-d` flag lets the container run in detached mode. You now need to supply a `conduit.toml` config file, an example can be found [here](../conduit-example.toml).
You can pass in different env vars to change config values on the fly. You can even configure Conduit completely by using env vars, but for that you need
You can pass in different env vars to change config values on the fly. You can even configure Conduit completely by using env vars, but for that you need
@ -56,29 +44,26 @@ to pass `-e CONDUIT_CONFIG=""` into your container. For an overview of possible
If you just want to test Conduit for a short time, you can use the `--rm` flag, which will clean up everything related to your container after you stop it.
If you just want to test Conduit for a short time, you can use the `--rm` flag, which will clean up everything related to your container after you stop it.
## Docker-compose
## Docker-compose
If the docker command is not for you or your setup, you can also use one of the provided `docker-compose` files. Depending on your proxy setup, use the [`docker-compose.traefik.yml`](docker-compose.traefik.yml) and [`docker-compose.override.traefik.yml`](docker-compose.override.traefik.yml) for Traefik (don't forget to remove `.traefik` from the filenames) or the normal [`docker-compose.yml`](../docker-compose.yml) for every other reverse proxy. Additional info about deploying
If the docker command is not for you or your setup, you can also use one of the provided `docker-compose` files. Depending on your proxy setup, use the [`docker-compose.traefik.yml`](docker-compose.traefik.yml) and [`docker-compose.override.traefik.yml`](docker-compose.override.traefik.yml) for Traefik (don't forget to remove `.traefik` from the filenames) or the normal [`docker-compose.yml`](../docker-compose.yml) for every other reverse proxy. Additional info about deploying
Conduit can be found [here](../DEPLOY.md).
Conduit can be found [here](../DEPLOY.md).
### Build
### Build
To build the Conduit image with docker-compose, you first need to open and modify the `docker-compose.yml` file. There you need to comment the `image:` option and uncomment the `build:` option. Then call docker-compose with:
To build the Conduit image with docker-compose, you first need to open and modify the `docker-compose.yml` file. There you need to comment the `image:` option and uncomment the `build:` option. Then call docker-compose with:
```bash
```bash
CREATED=$(date -u +'%Y-%m-%dT%H:%M:%SZ') VERSION=$(grep -m1 -o '[0-9].[0-9].[0-9]' Cargo.toml) docker-compose up
docker-compose up
```
```
This will also start the container right afterwards, so if want it to run in detached mode, you also should use the `-d` flag. For possible `build-args`, please take a look at the above `Build & Dockerfile` section.
This will also start the container right afterwards, so if want it to run in detached mode, you also should use the `-d` flag.
### Run
### Run
If you already have built the image or want to use one from the registries, you can just start the container and everything else in the compose file in detached mode with:
If you already have built the image or want to use one from the registries, you can just start the container and everything else in the compose file in detached mode with:
```bash
```bash
docker-compose up -d
docker-compose up -d
```
```
@ -101,32 +86,36 @@ So...step by step:
3. Create the `conduit.toml` config file, an example can be found [here](../conduit-example.toml), or set `CONDUIT_CONFIG=""` and configure Conduit per env vars.
3. Create the `conduit.toml` config file, an example can be found [here](../conduit-example.toml), or set `CONDUIT_CONFIG=""` and configure Conduit per env vars.
4. Uncomment the `element-web` service if you want to host your own Element Web Client and create a `element_config.json`.
4. Uncomment the `element-web` service if you want to host your own Element Web Client and create a `element_config.json`.
5. Create the files needed by the `well-known` service.
5. Create the files needed by the `well-known` service.
- `./nginx/matrix.conf` (relative to the compose file, you can change this, but then also need to change the volume mapping)
```nginx
- `./nginx/matrix.conf` (relative to the compose file, you can change this, but then also need to change the volume mapping)
server {
server_name <SUBDOMAIN>.<DOMAIN>;
```nginx
listen 80 default_server;
server {
server_name <SUBDOMAIN>.<DOMAIN>;
location /.well-known/matrix/ {
listen 80 default_server;
root /var/www;
default_type application/json;
location /.well-known/matrix/ {
add_header Access-Control-Allow-Origin *;
root /var/www;
}
default_type application/json;
}
add_header Access-Control-Allow-Origin *;
```
}
- `./nginx/www/.well-known/matrix/client` (relative to the compose file, you can change this, but then also need to change the volume mapping)
}
```json
```
{
"m.homeserver": {
- `./nginx/www/.well-known/matrix/client` (relative to the compose file, you can change this, but then also need to change the volume mapping)
"base_url": "https://<SUBDOMAIN>.<DOMAIN>"
```json
}
{
}
"m.homeserver": {
```
"base_url": "https://<SUBDOMAIN>.<DOMAIN>"
- `./nginx/www/.well-known/matrix/server` (relative to the compose file, you can change this, but then also need to change the volume mapping)
}
```json
}
{
```
"m.server": "<SUBDOMAIN>.<DOMAIN>:443"
- `./nginx/www/.well-known/matrix/server` (relative to the compose file, you can change this, but then also need to change the volume mapping)
}
```json
```
{
"m.server": "<SUBDOMAIN>.<DOMAIN>:443"
}
```
6. Run `docker-compose up -d`
6. Run `docker-compose up -d`
7. Connect to your homeserver with your preferred client and create a user. You should do this immediatly after starting Conduit, because the first created user is the admin.
7. Connect to your homeserver with your preferred client and create a user. You should do this immediatly after starting Conduit, because the first created user is the admin.
Jonas Zohren
3 years ago
committed by
Timo Kösters